Bestop Sailcloth Replace-A-Top

The replace – A – Top is made by Bestop and it allows you to retain and reuse your existing hardware that was installed by the factory while you get new windows and fabric for a soft top. 

This particular version of this top is made from sail cloth, which is a heavier fabric than that which is used in the normal Replace - A - tops.  This type of fabric is great because along with being heavier, it also happens to be one of the quietest fabrics that are used for soft tops.  There is a secret to this and it lies in the fact that this type of fabric is made from a number of plies.  Each one of these plies has a different role to play and when put together they prevent buffering while also absorbing the noise from the wind and reflecting the sounds from the road so that you get a silencing effect that you simply must experience to believe.

Features at a Glance

·         The sailcloth Replace – A – Tops that are made by Bestop are made with pride right here in the USA

·         These tops do come to you complete with a warranty that is good for a full 2 years

·         The sailcloth that is used to make these Replace – A – Tops is a premium, tough fabric that will dramatically reduce the outside noise while it also enhances the insulation

·         These kits come to you with the optional door skins, windows and the fabric for the soft top

·         These tops are easier to clean when compared to the traditional Jeep soft tops

·         The sailcloth fabric shows fewer wrinkles and waves than conventional Jeep soft tops

·         The sailcloth that these tops are created from is resistant to shrinkage that is temperature induced

·         This top is up to 50% quieter than the Jeep factory installed denim top

·         There are multiple plies of the sailcloth fabric used in this top.  These plies work to prevent buffeting, absorb the noise from the wind and reflect the sounds from the road

·         The sailcloth fabric is the Haartz brand that Bestop always uses.  This fabric is highly resistant to mildew and stains and has undergone rigorous UV testing

·         The zippers are scoop counted for replacing the windows

·         All of the seams have been sealed to ensure resistance to water

·         No drilling is necessary for a safe and proper installation

·         This top is greener and more economically friendly because of the fact that it allows for you to retain and reuse your hardware that was installed by the factory. 

·         Built to factory specifications so you know that you will get the proper fit, form and function

·         Installation is easy to complete and requires no sort of modifications

Bestop Replacement Soft Top Bow Assembly

Bestop makes these soft top bow assemblies in kits that are for the Jeep Wrangler model years 1997 – 2006.  This hardware is made in the same style as the factory hardware and it is the ideal way to replace your old assembly that is worn out.  It has been made from an engineered thermoplastic polymer as well as from carbon steel and it will give the soft top on your Jeep the support that it needs.  These kits include everything that you will need in order to install them.  They come with the installation hardware as well as the retainer clips, a tail gate bar, the top arch, bow knuckles in the quick release style and the door surrounds.

When you need a new assembly for the soft top on your Wrangler, this is the one that you need.  You might even just be making the change from a soft top to a hard top for the first time.  Either way, you are looking for a bow assembly for some reason and this one will be ideal to fit the needs of your Jeep and your wallet.  This particular bow assembly kit will work in conjunction with a replacement skin in the factory style or the actual factory soft top in sail cloth or regular material. 

Included Parts

With this replacement bow assembly for Jeep soft tops you will get:

·         All of the necessary clips

·         The tail gate bar

·         Surround knobs

·         Door surrounds

·         Bow knuckles in the quick release style

·         Bows

·         Header

·         Top arch

Features at a Glance

·         This replacement bow assembly for Jeep soft tops has been made by Bestop with pride right here in the USA

·         The assembly does come to you complete with a limited warranty that is good for a full year

·         Please note that this particular bow assembly kit is made for use only with half doors.  There are other part numbers that will work in conjunction with full doors

·         These replacement bow assemblies are made to the specifications that were set for the by the factory

·         When you purchase this assembly you will get the clips for the tail gate, the tail gate bar, spreader bars, tub rails, door surrounds, windshield channel and the bow assembly

·         If you need the door frames for the half doors or the windows, they are sold separately

·         This assembly is meant to be a replacement for your factory installed bow assembly and/or hardware

·         It has been made from engineered thermoplastic polymer and carbon steel

·         Each of the steel parts have been given a powder coat finish to give them a resistance to corrosion as well as to make them look great

Bestop Replace – A – Top with Clear Windows

Bestop’s Replace-A-Top allows you to take advantage of the factory installed hardware that you already have.  With this top, you will get all new windows as well as the fabric for the top itself 

This top will allow you to experience all of the durability and strength of a soft top that is high quality.  This replacement soft top is quite impressive in that it features all that we have come to expect from a Bestop top.  It has the Belt Rail Attachment System that is a Bestop exclusive and this makes removing as well as installing the top a simple process.  The zippers are over – sized and the Velcro thread is factory spec while the door seals and webbing are all made with that Bestop quality that is so important.  The windows are DOT approved and there is also a rear attachment system that allows for you to have the ability to open the tail gate and access your rear cargo area while not needing to open the rear window.

Probably the best thing of all is that you get all of this together in a single package from Bestop that will work right along with all of your factory installed hardware.  Now you can finally get rid of that tired, old, sagging, full of holes top and get the good looks and high quality that both you and your Jeep deserve.  To top it all off, Bestop backs this top with a warranty too.

Features at a Glance

·         The Replace – A – Top is made with pride by Bestop right here in the USA

·         This top comes to you complete with a warranty that is good for a full two years

·         Each one of the soft parts of this top is able to be replaced individually  which acts to extend the overall value of the top

·         Everything included in this package has been made to specifications set forth by the factory to ensure that you get the ideal fit, form and function

·         Because the seams are all sealed you get protection that is water tight

·         This top is made using a premium fabric that is able to retain its shape regardless of the temperature

·         The fabric has been sewn using thread that is industrial strength.  This ensures that you get a construction of the soft top that is durable

·         The zippers are heavy duty and these allow for easy removal and installation of the windows

·         This fabric is resistant to mildew and it also contains UV inhibitors.  You can get it in all of the factory original colors

·         These kits come to you complete with the clear door skins, clear windows for the rear and side and the fabric of the soft top